Quality Control Analysis of Metal Baseplate Finishing process using Statistical Process Control (SPC) and Failure Mode and Effect Analysis (FMEA): A Case Study of Indonesia Company

Authors

  • Bethriza Hanum Department of Industrial Engineering Mercu Buana University, Indonesia

DOI:

https://doi.org/10.54756/IJSAR.2022.V2.i6.2

Keywords:

Baseplate, Quality, Defective, FMEA, SPC

Abstract

Pt. Anugerah Putra Plating is one of the service companies engaged in the metal finishing industry or, more precisely Zinc Plating (zinc coating process that uses electricity) where the coating process is most widely used for small-sized goods with an extensive production scale and one of the products processed at PT. This Plating Son Award is a baseplate. Problems arising from defects are not up to the specified standards, triggering a decrease in product quality. The company produced baseplate from January 2020 to December 2020 of 53145 pcs, in that period, there were defects of 2980 pcs or 5.60%. The percentage exceeded the company's disability target of 3.50%. Based on direct observation of spaciousness and data processing using FMEA, it can be known that 4 types of defects are contained in baseplate products, namely White Rush, Oily, Black Spot and also Imperfect Coating. The most dominant defects are ranked 1 and 2, with the highest score is White Rush with a Risk Priority Number (RPN) score of 392. For this type of baseplate defect, the root of the problem is (1) Improper rounding distance, (2) unscheduled maintenance of the machine, (3) Improper chemical solution, and (4) a Dirty working environment. Proposed improvements based on the results of the analysis are as follows the types of defects White Rush: (1) Making hook hangers at a distance so that the hcl process is organized, (2) Made sterile storage space and also repair/inspection of routine machines, (3) Making the inspection sheet of chemical solution monitoring if this proposal can be carried out properly, the potential enough results that can be obtained is very - very more efficient and structured time, for the waste of costs can be emphasized to a minimum, as well as improve the quality of the product produced, so that it is expected that (estimate) the cumulative value of the company can increase by 1.8 from 5.6 - 3.8 (4)Apply pickets in the respective line - each after business hours.

References

Kholil, M., Alfa, B.N., Maulana, I., Hendri and Hidayat, A.A., 2018, November. Quality analysis of trolley shopping cart with six sigma approach. In AIP Conference Proceedings (Vol. 2030, No. 1, p. 020306). AIP Publishing LLC.

Atep Afia Hidayat, Muhammad Kholil, Jakfat Haekal, Wahyu Erka Sandra, & Dede Rukmayadi. 2021. Lean Manufacturing Design to Reduce Waste in Customer Complaint Services Using Lean Principles in Coil Industry Companies, of Indonesia. International Journal of Engineering Research and Advanced Technology (ijerat) (E-ISSN 2454-6135) DOI: 10.31695/IJERAT, 7(9), 13–22. https://doi.org/10.31695/IJERAT.2021.3728

Muhammad Kholil, Jakfat Haekal, Adizty Suparno, Muhammad Rizki, & Tri Widodo. (2021). Integration of Lean Six sigma in Reducing Waste in the Cutting Disk Process with the DMAIC, VSM, and VALSAT Method Approach in Manufacturing Companies. International Journal of Engineering Research and Advanced Technology (ijerat) (E-ISSN 2454-6135) DOI: 10.31695/IJERAT, 7(9), 26–42. https://doi.org/10.31695/IJERAT.2021.3730

Kholil, M., Haekal, J., Suparno, A., Savira, D., Widodo, T. 2021. Lean Six Sigma Integration to Reduce Waste in Tablet coating Production with DMAIC and VSM Approach in Production Lines of Manufacturing Companies. International Journal of Scientific Advances ISSN: 2708-7972. 2 (5), 719-726

Haekal, J. (2022). Quality Control with Failure Mode and Effect Analysis (FMEA) And Fault Tree Analysis (FTA) Methods: Case Study Japanese Multinational Automotive Corporation. International Journal of Scientific Advances (IJSCIA), 3(2),227-234

Haekal, J. (2022). Integration of Lean Manufacturing and Promodel Simulation on Repair Production Process Flow of Polysilane Bottle Printing Using VSM, WAM, VALSAT, And RCA Methods: Case Study Packaging Manufacturing Company. International Journal of Scientific Advances (IJSCIA). 3(2), 235-243,

Almahdy, I., Kholil, M., Haekal, J., Widodo, T. 2021. Control Analysis of Medicine Inventories Using ABC, VEN, and EOQ Approach in Pharmaceutical Companies. International Journal of Scientific Advances ISSN: 2708-7972. 2 (5), 708-712

Haekal, J. 2021. Improving Work Efficiency and Productivity with Line Balancing and TPS Approach and Promodel Simulation on Brush Sub Assy Line in Automotive Companies. International Journal of Scientific Advances ISSN: 2708-7972. 2 (3), 387 - 397

Haekal, J. (2022). Quantitative Strategic Planning Matrix (QSPM) in Determining Alternative Strategies for the Covid-19 Epidemic in the Food and Beverage Manufacturing Companies in Indonesia. International Journal of Scientific and Academic Research (IJSAR), eISSN: 2583-0279, 2(4), 1-10.

Haekal, J. The Integration of Lean Manufacturing and Promodel Simulation in the Shampoo Production Process with the VALSAT and VSM Method Approach. International Journal of Multidisciplinary Research and Publications, ISSN: 2581-6187, 4(11), 35-51

Koeswara, S., Kholil, M. and Pratama, Z., 2018, November. Evaluation on Application of Queuing Theory On Payment System in the Supermarket “Saga” Padang Pariaman West Sumatra. In IOP Conference Series: Materials Science and Engineering (Vol. 453, No. 1, p. 012045). IOP Publishing.

Hidayat, A.A. and Kholil, M., 2018, November. The Implementation of FTA (Fault Tree Analysis) and FMEA (Failure Mode And Effect Analysis) Methods to Improve the Quality of Jumbo Roll Products. In IOP Conference Series: Materials Science and Engineering (Vol. 453, No. 1, p. 012019). IOP Publishing.

Almahdy, I., Kholil, M. and Yasin, M.Y., 2018, November. A Case of Study on Correlation between Age, Noise Level, and Productivity at Barge in Oil Industry. In IOP Conference Series: Materials Science and Engineering (Vol. 453, No. 1, p. 012009). IOP Publishing.

Kholil, M., Alfa, B.N. and Hariadi, M., 2018, April. Scheduling of house development projects with CPM and PERT method for time efficiency (Case study: House type 36). In IOP Conference Series: Earth and Environmental Science (Vol. 140, No. 1, p. 012010). IOP Publishing.

Haekal, J., Hanum, B., & Adi Prasetio, D. E. 2020. Analysis of Operator Body Posture Packaging Using Rapid Entire Body Assessment (REBA) Method: A Case Study of Pharmaceutical Company in Bogor, Indonesia. International Journal of Engineering Research and Advanced Technology - IJERAT (ISSN: 2454-6135), 6(7), 27-36.

Hanum, B., Haekal, J., & Adi Prasetio, D. E. . 2020. The Analysis of Implementation of Enterprise Resource Planning in the Warehouse Division of Trading and Service Companies, Indonesia. International Journal of Engineering Research and Advanced Technology - IJERAT (ISSN: 2454-6135), 6(7), 37-50.

Kholil, M., Haekal, J., Eko Adi Prasetio, D. ., & Sulaiman Hasan. 2020. The Lean Manufacturing Design For Improving Production Scheduling Using Product Wheel Method in Chemical Manufacturing Company, Indonesia. International Journal of Engineering Research and Advanced Technology - IJERAT (ISSN: 2454-6135), 6(8), 12-18.

Haekal, J., & Setio, H. 2017. Selection of Raw Material Suppliers Using Analytical Hierarchy Process in Food and Beverage Company, South Jakarta. ComTech: Computer, Mathematics and Engineering Applications, 8(2), 63-68.

HAEKAL, J. (2018). PERANCANGAN DAN EVALUASI IMPLEMENTASI SISTEM MANAJEMEN MUTU ISO 9001: 2015 MELALUI KEPUASAN PELANGGAN DI UNIVERSITAS ISLAM AS-SYAFI’IYAH (Doctoral dissertation, Universitas Mercu Buana Jakarta).

Kholil, M., Haekal, J. H, Sulaiman. 2020. Lean Manufacturing Design to Reduce Waste in Gear Production Process Using VSM and Kaizen Method Approaches (Case Study: Gear Primary Driven K56 Product). Journal of Scientific and Engineering Research. 7(8), 1-9

Haekal, J., & Adi, D. (2020). Planning Of Production Facilities Layouts In-Home Industry With The Systematic Layout Planning Method. International Journal of Innovative Science, Engineering & Technology, 7(10), 147-153.

Purba, H. H., Saroso, D. S., & Haekal, J. (2019, November). 5S APPLICATION TRAINING (SEIRI, SEITON, SEISŌ, SEIKETSU, AND SHITSUKE) TO IMPROVE THE QUALITY OF THE WORK ENVIRONMENT IN THE SERVICE INDUSTRY. In ICCD (Vol. 2, No. 1, pp. 352-354).

Hidayat, A. A., Kholil, M., Haekal, J., Ayuni, N. A., & Widodo, T. Lean Manufacturing Integration in Reducing the Number of Defects in the Finish Grinding Disk Brake with DMAIC and FMEA Methods in the Automotive Sub Industry Company. International Journal of Scientific Advances ISSN: 2708-7972. 2 (5), 713-718

Haekal, J., & Setiawan, I. (2020). Comparative Analysis of Raw Materials Controls Using JIT and EOQ method For Cost Efficiency of Raw Material Supply in Automotive Components Company Bekasi, Indonesia. International Journal of Engineering Research and Advanced Technology (ijerat), 6(10), 76-82.

Haekal, J., Hanum, B., & Adi Prasetio, D. E. 2020. Application of Quantitative Strategic Planning Matrix (QSPM) For Determination of Alternative Strategies in Food and Beverage SMES in Bogor Indonesia. Journal of Scientific and Engineering Research. 7(7), 137-145

Hanum, B., Haekal, J., & Adi Prasetio, D. E. . 2020. SPHC Material Inventory Control Analysis in Project VL01 Centralized by the EOQ Method in Automotive Company Indonesia. Journal of Scientific and Engineering Research. 7(7), 130-136

Haekal, J. . 2021. Application of Lean Six Sigma Approach to Reduce Worker Fatigue in Racking Areas Using DMAIC, VSM, FMEA and ProModel Simulation Methods in Sub Logistic Companies: A Case Study of Indonesia. International Journal of Engineering Research and Advanced Technology (ijerat) (E-ISSN 2454-6135) DOI: 10.31695/IJERAT, 7(6), 1–11. https://doi.org/10.31695/IJERAT.2021.3716

Indra Almahdy, Muhammad Kholil, Jakfat Haekal, Arie Firmansyah, & Dede Rukmayadi. 2021. Implementation of Lean Manufacturing to Reduce Waste in the Maintenance Section in National Automotive Sub Companies of Indonesia. International Journal of Engineering Research and Advanced Technology (ijerat) (E-ISSN 2454-6135) DOI: 10.31695/IJERAT, 7(9), 5–12. https://doi.org/10.31695/IJERAT.2021.3729

Downloads

How to Cite

Bethriza Hanum. (2022). Quality Control Analysis of Metal Baseplate Finishing process using Statistical Process Control (SPC) and Failure Mode and Effect Analysis (FMEA): A Case Study of Indonesia Company. International Journal of Scientific and Academic Research (IJSAR), EISSN: 2583-0279, 2(6), 9–18. https://doi.org/10.54756/IJSAR.2022.V2.i6.2

Issue

Vol. 2 No. 6: IJSAR June-2022

Section

Section 1: Engineering Sciences

License

Copyright (c) 2022 Bethriza Hanum

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.